Personal menu

WORLDWIDE SHIPPING

fast, flexible, secure options

ONLINE SUPPORT 24 / 7

anytime, anywhere help

MONEY BACK GUARANTEE

shop with confidence

WIDE SELECTION

every day low prices

DIY Parts & Components

View as Grid List

Sort by

Display per page

Waveshare 1.3 inch 128*64 OLED (A), SPI/I2C interfaces, Curved Horizontal Pinheader

£8.96 £10.66

£8.96 £10.75

1.5inch OLED display Module, 128x128 pixels, 16 gray scale, SPI/I2C interface
Overview
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.
128x128 high resolution
16 gray scale, better display effect
Support SPI or I2C interface, configured via onboard resistor
Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Driver: SSD1327

£12.35 £14.20

1.5 inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interface
Overview
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
128x128 high resolution, 65K colors, clearly displays colorful images
Support 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Come with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI

£17.53 £20.33

Overview
This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, whats more, it features USB to UART converter for easy serial communication.
It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W.
USB HUB HAT Features
4 USB Ports, compatible with USB2.0/1.1
Onboard USB to UART, convenient for Raspberry Pi serial debugging
Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
What is on the USB HUB HAT

£9.49 £11.68

Overview
The USB3300 USB HS Board is an accessory board which acts as the USB high-speed external PHY device for ULPI interface, features the USB3300, MIC2075-1BM onboard.
USB3300, MIC2075-1BM, ULPI interface

£12.04 £13.97

Overview
1. The PCF8563 RTC Board provides the real-time clock/calendar function, which can be driven by a battery on board and works independently even when the MCU is turned off.
The PCF8563 RTC Board features I2C pinheader on one side, and I2C connector on the opposite side. Hence, its more flexible to connect the board to your development system. The board also supports I2C cascading, allowing the use of multi module connected to the I2C bus at the same time by connecting the pinheader and connector.
Features
PCF8563, I2C pinheader, I2C connector, 3.3V battery included

£6.27 £7.84

Features
1. 3W high-power 850 infrared LED
Onboard photoresistor, the ambient light detector
Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
Allows adding night vision function to cameras which feature embedded infrared filter :
a) 100 degree field of view, two pieces of LED is required to get wider field of view
b) Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)
How to Use

£7.80 £9.36

£6.27 £7.84

Incorporates original chip Si3404, high-efficiency, high-safety, stable-performance
10/100/1000Mbps auto-negotiation Ethernet port
802.3af/at-compliant PoE (Power over Ethernet) standard
Isolated SMPS (Switching Mode Power Supply), effectively protecting the powered device
5V DC output, suitable for powering Raspberry Pi and other small-scale network devices
Black dull-polish metal case, sturdy and rugged, higher protection level, better heat dissipation
Power Supply: Support 1/2(+); 3/6(-); 4/5(+); 7/8(-) powering
POE input voltage: 37V ~ 57V

£16.55 £19.20