Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Engine Tools
ZK-021 Car Ignition Lock Removal Tool for Mercedes-Benz
- Sometime it is necessary to remove the ignition lock/ starter lock to programming the mileage.
- This tool is made by stainless steel pipe, durable.
- Easy to operate.
- Remove and install the ignition switch device.
- Suitable for Mercedes-Benz W129, W140, W202, W210, W220, W203, W209, W211, W204 chassis.
$6.06 $6.97
ZK-030 Car Oil Filling Hose DSG Gearbox Oil Change Adaptor VAS6262A for Audi
- Gear inflation hose for DSG transmission.
- Can be used in the same way as Vas 6262 adaptor included for 1 litre of VAG lgebinde G052182 A2).
- Adpater hose provides a progressive changing gear on dual clutch transmissions.
- Male Thread Connection M24 x 1.5 mm.
- Hose length: 1500mm
$16.26 $19.19
ZK-058 Car LS EGR Delete Intake Exhaust Block Off Plate for Chevrolet Silverado LSX 4.8L 5.3L 6.0L LQ4
- . Durable and reliable.
- Easy installation and easy to use.
- Corrosion resistance and does not fade.
- Long-term service life.
- Material: metal
$12.69 $14.72
ZK-071 Car Heater Blower Motor Tool for Volvo
- Heater blower motor installation/extractor tool.
- OEM: 9997284 (for Volvo), 412-140 (for Land Rover)
- Easy to operate.
- Durable and reliable.
- Fits for Volvo S60/S60 Cross Country, S60L, S80, S80L, V60, V60 Cross Country, V70, XC60, XC70 / Land Rover Freelander 2 2.0lit 2006-2014, Range Rover and Evoque 2008-
$57.10 $66.24
ZK-075 Car Turbo Engine Timing Locking Belt Tool Kit for Opel / Vauxhall 1.0 1.2 1.4 1.4T LUJ
- For checking and setting the camshaft and crankshaft in correct TDC position.
- Fits for Vauxhall/Opel/Chevy 1.0, 1.2, 1.4 petrol engine (chain).
- Timing kit for Saturn/Vauxhall / Opel: Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Corsa-D 1.0 1.2 1.4 (2009- ), Cascada 1.4 (2013- ), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Chevry: Aveo1.2 1.4 (2011-), Cruze 1.4 (2011-), Orlando 1.4 (2012-)
- Use guide, removal of the timing chain will require the removal of the sump, ensure the engine is at TDC No 1 cylinder, ensure the chain tensioner is fully retracted and held in the retracted position using a suitable pin, and remove the crankshaft pulley using an appropriate pulley holding tool
- Engine Codes: LWD, L2Z, LDD, LUU/A14XFL, LDD/A14XER, LDD/A14XEL, LUJ/114NET, LUJ/A14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJ/A14NET, LDD/A14XER, LUJ/A14NET, LUH/A14NEL, LUJ/A14NET, LUJ/A14NEL, L2Q/A12XEL, LDC/A12XER, LWD/A12XEL, LDD/A14XEL, LDD/A14XER.XER???LWD / A12XEL???LDD / A14XEL???LDD / A14XER
$29.08 $35.48
ZK-087 Car Fuel Injector Remover Tool for Land Rover / Jaguar 310-197
- Specially designed to fit the long petrol injectors used on the models equipped with the 5.0lt V8 petrol engines.
- The angled slide hammer shafts gives improved access when working on the rear most injectors.
- Angled and flexible injector clamp system.
- OEM 310-197.
- Fits for Jaguar X150, XK Series, X250 (XF) and XJ models (V8 5.0lt petrol engines) / Land Rover Discovery 4, Range Rover, Range Rover Sport (V8 5.0lt petrol engines).
$34.14 $40.97
ZK-106 Car Multi Plate Clutch Stack Tool Direct Shift Gearbox Tool Equiv T10303 for Audi A3
- Clutch retaining tool used to lock the clutch basket for VAG models with DSG 02E 6 speed transmissions.
- This tool is used to assist in the removal and fitting of the multi-plate clutch stack when working on the DSG 02E 6 speed transmissions used across the VAG ranges
- Application: VAG DSG 02E 6 Speed vehicles
- Fits for Volkswagen Golf, Touran / Audi A3 2004- /Audi TT 1999-
- OEM: T10303 Retaining Tool
$21.51 $26.46
ZK-108 Car Fuel Injector Install & Remove Tool for BMW N20 N55
- Fuel injector install tool compatible with BMW N20, and new N55 engine.
- BM number: 130320, note: this injector not fit old N55 engine
- Specially designed to install and remove the injector for N20 N55 engine.
- Tips: you much evenly install the tool first before installing or removing the injectors. The tool may not come fully tighten, so you much first make sure you tighten everything first before you ue the tool.
- Made of steel, high hardness, stable and strong, not easy broken.
$23.37 $27.11
EA211 Timing Tool Axle Gear Retainer Belt Replacement (Gray)
- Application: for Volkswagen Audi Skoda 1.4T/1.4/1.5/1.6/1.2T belt tool
- Sturdy and durable, quality assurance, long life
- Accurate positioning and high hardness
- Forged with alloy steel, resistant to strong impact and long service life
- Gear buckle is obvious and not easy to damage
- Size: 5.6x2.3x0.8 cm
- Weight: 35 g
$5.70 $6.90
2pcs Ignition Coil Plug Removal Tool Snap Wrench (Black)
- Material: chrome vanadium steel
- Accurate plug size, easy to remove
- Wave-shaped handle, suitable design, labor-saving and not easy to slip out
- Integrated molding, tight and durable, excellent material selection, not easy to rust
- Product size: 130x20x4mm
- Weight: 0.07kg
$6.18 $7.42
For Can Am Maverick X3 2017-2019 Auxiliary Clutch Belt Removing Tool
- It is very important to use the correct tools to replace the old belt.
- Turbine belt replacement tool so that it can move 360 degrees and is very easy to use.
- Made of high-quality CNC aluminum, sturdy and durable.
- Provides additional leverage for turning the auxiliary belt to install the belt.
- Compatible models:
- Suitable for 2017-2019 Can Am Maverick X3 MODELS
- Suitable for 2018 Can-Am Maverick X3 900
- Suitable for 2017-UP Can-Am Maverick X3 Turbo
$14.35 $16.79
ZK-009 Car 14mm Universal Spark Plug Removal Sleeve Tool for Nissan/BMW/Volkswagen/Mercedes-Benz/Audi
- Madefrom chrome Vanadium Bi-Hex socket with wobble function.
- Suitable for spark plugs with 12pt profile on BMW vehicles: 1 Series (E81/E87-N43B), 3 Series (E90-N43B) and 5 Series (E60-N43B)Double Cut
- Durable and reliable.
- Easy to operate.
- Length: 92mm
$9.17 $10.91
NEED HELP?
Payment options
