Non-destructive and quick installation, one-button closure, and will not scratch the machine.
It does not affect the replacement of the battery, which is convenient and quick.
Soft silicone straps, anti-mushroom head locks, tightly bundled and upgraded for protection.
Effectively increase the height by about 30mm. Greatly increases the distance between the fuselage and the ground, effectively preventing the ground debris from damaging or soiling the fuselage and sensors during take-off and landing.
Suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 remote control
Small size, light weight, easy to store and carry
Design support feet, which can be positioned and can also share the force, so that the force of the extension bracket is more balanced, and the hand-held remote control is more labor-saving
Double wall thickness and bone design make it have greater load-bearing capacity, no matter how large the flat plate can be easily carried
The clamping width of 12cm allows the tablet to be used with the shell, making installation more worry-free
Suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 remote control
Small size, light weight, easy to store and carry
Design support feet, which can be positioned and can also share the force, so that the force of the extension bracket is more balanced, and the hand-held remote control is more labor-saving
Double wall thickness and bone design make it have greater load-bearing capacity, no matter how large the flat plate can be easily carried
The clamping width of 12cm allows the tablet to be used with the shell, making installation more worry-free
This modification kit can turn the drone into a handheld gimbal, which can be used for aerial photography or land photography, and can also use the remaining power of the drone to continue shooting in an emergency.
A 1/4 tripod interface is reserved at the bottom, which can be connected to various tripods.
Hand-held can be connected to a tripod for one-hand operation, or you can directly hold the remote control for shooting operation.
Free your hands and shoot easily. You can fix the remote control on the belly support bracket, free your hands and create outdoor blockbusters at will.
Triangular support, effective decompression, stable installation. The waist, abdomen, shoulders and remote control form a stable triangular structure through the straps, which effectively reduces pressure and labor-saving upgrades, and the installation is more stable.
No obstruction of vision, smooth operation. No obstruction of the screen image, no impact on operation, full-screen display.
Adjustable angle, free viewing angle. The angles of the belly support bracket and the remote control can be rotated freely to adjust to the appropriate viewing angle.
Foldable design, no sense of storage. During shooting, you can quickly remove the remote control and fold the bracket onto the strap.
The illuminated tripod is specially designed for DJI Mini 4 Pro drone. It fits the curved surface of the Mini 4 Pro body very well and has a hollow carving design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes. It can help you better observe your surroundings when you are flying or taking off or landing in the dark night.
Yellow, green and blue mixed color lights, 3 flashing modes, fast flashing mode, slow flashing mode and constant light mode.
The luminous tripod can increase the distance between the bottom of the Mini 4 Pro and the ground by 20 mm. When the Mini 4 Pro is used at night or on overgrown or bumpy gravel roads, it can reduce the impact and make it easier for no one to use it. The drone lands smoothly, preventing ground debris or water stains from soiling or damaging the drone body, gimbal, sensors and propellers, providing safe landing protection.
Built-in battery, rechargeable and reusable, the charging time is about 30 minutes, and the use time after full charge is about 60 minutes.
Lightweight design. The light-emitting tripod weighs only 18.5 grams and can stably carry the fuselage. The lightweight design will not add extra burden to the Mini 4 Pro flight and will not shake or fall off during flight. It also adopts a foldable and quick-release design that will not damage the drone body, is easy to install, and improves portability.
Heightened landing gear for Mini 4 Pro, effectively increasing the fuselage by 14mm to prevent ground debris from contaminating the fuselage and sensors during takeoff and landing.
It can still take off and land on uneven ground, effectively protecting the safety of the fuselage;
Light weight does not affect flight, triangular structure design, stable and not easy to fall off;
Quick-release design, easy to install and remove.
Main material: ABS
Net weight: 20g
Product size: 7 x 2.3 x 1.8cm (front feet), 5.1 x 4.6 x 2.5cm (rear feet)