Features: LM393 chip, stable operation, fixed bolt holes for easy installation, dual output mode of the module, simple digital output, more accurate analog output, and adjustable sensitivity
Package includes: RFID-RC522 module X1, standard S50 blank card X1, S50 special-shaped card (as shown in the shape of the key ring); a straight row and a bent row of pins;
NB-IoT HAT for Raspberry Pi, Based on SIM7020E, B1/B3/B5/B8/B20/B28 Bands
Applicable Region
SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.
Please check the supported bands according to your local service provider when placing order.
Overview
This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.
Raspberry Pi connectivity, compatible with any revision
Support communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.
Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts
Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out
Stripping length: About 11-12mm
Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire
Rated voltage: 250V (LT-2/LT-3 is 250/600V)
Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)
Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off
Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts
Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out
Stripping length: About 11-12mm
Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire
Rated voltage: 250V (LT-2/LT-3 is 250/600V)
Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)
Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off
Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts
Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out
Stripping length: About 11-12mm
Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire
Rated voltage: 250V (LT-2/LT-3 is 250/600V)
Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)
Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off
Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts
Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out
Stripping length: About 11-12mm
Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire
Rated voltage: 250V (LT-2/LT-3 is 250/600V)
Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)
Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off
Material: PA nylon shell, stainless steel shrapnel, electrolytic copper nickel-plated tin contacts
Weight: About 3.21g/piece with two inputs and two outputs, about 4.55g/piece with three inputs and three outputs, about 9.9g/piece with two inputs and four outputs, about 10.18g/piece with two inputs and six outputs, three inputs About 12.5 g/piece for six-out, 18.3 g/piece for three-in and nine-out, 13.14 g/piece for four-in and four-out, and 15.8 g/piece for five-in and five-out
Stripping length: About 11-12mm
Wiring specifications: SPL series and LT-2/LT-3 can be connected to 0.4-2.5 square millimeters of multi-strand flexible wire/0.5-4 square millimeters of single-strand hard wire, LT series can be connected to 0.4-4 square millimeters of multi-strand flexible wire / 0.5-6 square millimeters single-strand hard wire
Rated voltage: 250V (LT-2/LT-3 is 250/600V)
Rated current: SPL series 32A, LT series 36A (where LT-2/LT-3 is 40A)
Features: PA engineering plastic, not easy to change color, not easy to deform, flame retardant insulation, high temperature resistance, durable, easy to install, hard and flexible wire can be inserted, easy installation, fast and simple wiring, multi-strand flexible wire, single-strand Hard wires, etc. can be inserted directly, with strong tightness and not easy to fall off