Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Cars & Vehicles
UPA V1.3 Car USB Programmer ECU Chip Tuning Eeprom Full Set
- This set of New UPA USB Programmer main unit used for main unit damaged
- Software version: V1.3
- EEproms: Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin F-lat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.
- M-otorola MCUs: Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the 10pin ISP connector of main board. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let you make your job faster, precise and easier)
- Once your workshop is equipped with our Adapter Set you will have an all new UPA Experience.
- STMicroelectronics ST62*:
- ST6240, ST6245, ST6249
- NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9
£33.63 £39.01
V309 Car Portable OBD2 Scanner Car Diagnostic Tool OBD 2 Automotive Scanner OBD Code Reader
- Working voltage: 9-16V
- Working current: 80mA
- Operating environment: -30 ~ 70 degree Celsius
- Storage temperature:-30 ~ 80 degree Celsius
- Product size: 95.5 x 72.1 x 22.2mm
- Product weight: 147g
- Protocol
- SAE J1850 PWM (41.6 Kbaud)
£13.19 £16.09
Mini Bluetooth 4.0 ELM327 OBD Car Fault Diagnostic Scanner with Power Switch
- Function
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (Check Engine light)
- Display current sensor data
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
£12.19 £14.26
KONNWEI KW850 OBDII/CAN Car Auto Diagnostic Scan Tools Auto Scan Adapter Scan Tool Supports 8 Languages and 6 Protocols (Can Also Detect Battery and Voltage, Only Detect 12V Gasoline Car)
- Support ISO 9141, KWP2000
- Support SAE J1850
- Support CAN bus
- Support J1850 VPW, J1850 PWM
- Support system: XP WIN7 WIN8 WIN10
- Language: English, French, German, Dutch, Spanish, Russian, Portuguese, Italian
- No need to connect with computer
- Update: Online (Website: http://www.itoscanner.com)
£33.67 £42.09
For Yamaha 2006-2009 SM04 Bicycle/Motorcycle Immo System Emulator Full Chips
- Compatible with all Yamaha motorcycles, bicycles and scooters from 2006 to 2009.
- Easy to install, no programming is required, only wires need to be connected.
- Completely imitate the work of conventional anti-theft systems, including the work of LEDs on the dashboard.
- For simulator installations in conventional anti-theft systems:
- Remove the sealant from the immobilizer housing.
- Remove a PCB from the immobilizer and remove the wires from it.
- Connect the simulator according to the drawing.
- Insert the simulator into the anti-theft system housing.
£14.06 £16.60
Creator C310+ V7.6 Car OBD2 Scanner Car Diagnostic Tool OBD 2 Automotive Scanner for BMW
- Software Version :V7.6
- Languages: English and German, you can update for more languages later
- 2.8 inch color LCD display, 320 x 240 Pixel
- support for USB 2.0 upgrade, Free Upgrade
- Hand-held, easy to carry and operate
- Functions:
- (1). Read trouble codes
- (2). Clear trouble codes
£38.42 £44.18
KONNWEI KW680 Mini OBDII Car Auto Diagnostic Scan Tools Auto Scan Adapter Scan Tool (Can Detect Battery and Voltage, Only Detect 12V Gasoline Car) (Black)
- Support ISO 9141, KWP2000
- Support SAE J1850
- Support CAN bus
- Support J1850 VPW, J1850 PWM
- Support system: XP WIN7 WIN8 WIN10
- Highlights
- Language: English, French, German, Dutch, Spanish, Russian, Portuguese, Italian
- No need to connect with computer
£21.82 £26.83
KONNWEI KW720 Car 3.2 inch 6V-24V Lead-acid Battery Tester with Printer
- It can check the overall operating status of 6V 12V 24V battery. Battery testing can analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the aging extent. Cranking test helps you test and analyze the starting motor, and the charging test is to check the charging system status to avoid damaging the battery.
- The battery tester built in printer, equipped with standard thermal printer paper,can print the last test result of this battery tester directly. After the test is completed, you can easily print the test results, then paste it on the worksheet.Support the majority of vehicle battery standards, such as CCA, BCI,CA,MCA,JIS,DIN,IEC/EN/SAE,Suitable for all 1V -30V lead-acid batteries ranging from 100 to 2000 CCA, including regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries for the truck, boat, Car, motorcycles, lawn mowers and other gardening machines,etc.
- This car battery load tester offers vehicle electrical safety through exceptionally polarity reverses connection protection. Fully Insulated Alligator Clips are built with user safety in mind through spark-free operation and reverse polarity protection.
- It is easy-to-use and can get accurate results in seconds. The battery alternator tester can directly detect bad cell battery and test the battery that is losing power (as low as 1.0V), no need to full charge before testing.
- Languages: Chinese, English, German, French, Japanese, Korean, Dutch, Russian, Spanish, Italian, Portuguese, Polish, Persian
- System Voltage: 6-36Volts
- Measure Standard:
- CCA:100-2000
£89.61 £104.85
KONNWEI KW600 Auto Battery Analyzer 100 to 2000CCA Car Tester 12V 2.4 inch Digital Color Screen Cranking Charging Car Diagnostic
- Feature:
- Simple and easy to use.
- Test batteries on and off the vehicle.
- Accurate results in milliseconds.
- Battery life analysis.
- Test results based on: CCA(100-2000), IEC(100-1400), EN(100-2000), DIN(100-1400), CA(100-2000), BCI(100-2000), MCA(100-2000), SAE(100-2000), GB(100-1400), JIS(26A17-245H52)
- Support 11 language: Languages English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian
- Operating temperature: 0 ~ 50 degree Celsius
£23.76 £29.47
KONNWEI KW818 EOBD/OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner (Only for 12V Gasoline Car)
- The KONNWEI Kw818 new OBD2 / EOBD / CAN auto diagnostic scanner supports all 10 OBDII test modes on all OBDII compliant vehicles for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, Real Time Battery Voltage Monitoring, the KONNWEI KW818 is truly the ultimate in power and affordability, allowing users to do their jobs faster.
- Functions
- Read engine fault codes and shows definitions.
- Read DTCs
- Clear DTCs
- Read data stream
- Turn off MIL and reset monitors
- View freeze frame data
£23.24 £27.19
D900 CANBUS OBDII Live PCM Data Code Reader 2012 Ve (Black)
- Color: Black
- Material: Plastic housing
- Display: 2.8" LCD (backlight)
- Displays the DTC definitions
- Works with CAN-equipped vehicles
- Reads and clears all generic and some manufacturer, specific DTCs
- Resets check engine lights
- Views OBD II Live data
£17.57 £21.43
KONNWEI KW870 2 in 1 Car OBD2 Fault Diagnosis + Battery Tester
- Battery tester specification
- System voltage: 6-12 Volts
- Test Result: Good, Recharge or Replace
- Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
- Internal resistance value
- Life in percentage (%)
- Cranking system
- Charging system
£39.26 £47.90
NEED HELP?
Payment options
