Made of high-quality materials, it has strong applicability, water separation efficiency, and filtration of impurities.
The connected plastic modules are not easy to separate and have strong sealing.
Installation position: on the pipeline between the fuel pump and the throttle body inlet
Purpose: Filter out harmful particles and moisture in the engine fuel gas system to protect the oil pump nozzle, cylinder liner, piston ring, etc., reduce wear, avoid clogging, reduce mechanical wear, ensure stable engine operation, and improve reliability.
The internal air diverter turbulates the air longer and ensures all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 50 micron bronze filter to the intake.
An internal baffle keeps the collected oil from splashing around under race conditions.
The can is also washable, unlike many other cans that require you to replace your filtration system.
An oil catch can is used in turbo applications, or high-performance racing applications where excessive blow-by (leakage past the piston rings) of air and fuel vapor occurs. This creates a positive pressure in the crankcase. During engine operation, blow-by gases, as well as oil mist from the rotating components of the engine, pass through the PCV valve and are routed back into the intake for the engine to burn off. However, some of the oil mist and other by-products settle along the engine intake and over time form a gunk. The oil catch tank collects such oil mist and condenses the fuel vapors while allowing cleaner gases to be passed back into the intake.
All oil vapor expelled by your turbo charged motor before it can harm your cars performance keeps the engine clean even under hard driving conditions.
The catch can will keep out the Dirt and oil get inside Your Engine from your intake system Increases horsepower and Prolongs your engine life.
Reduce the amount of steam entering the intake manifold
Reduce the chance of secondary combustion
Reduce carbon deposition and protect the engine
Installation instructions: Before installation, be sure to choose the installation location. Since the engine will emit heat while working, try to install the oil venting pot as far away from the heat source as possible to facilitate cleaning of the oil venting pot in the future. oil-water mixture. When connecting, it must be fixed with a clamp, and try to keep the whole pipeline in a vacuum state.