Easy to control: One-button operation on the remote control, and the remote control range of the delivery device is the same as that of the drone remote control.
Simple structure: 30% lighter than old throwers, convenient size and easy to install
Built-in battery, charging time is about 50 minutes, can work continuously for 5 hours
Usage: Fishing bait, drone line release, flower throwing, advertising, lead guidance, party celebrations, marriage proposals, search and rescue.
Reduce the wear and tear of the tripod and chassis, effectively increase the height by 25mm, prevent scratching the fuselage and gimbal, and can still take off and land under uneven ground conditions
Lightweight and stable frame, can stably carry the fuselage, almost does not affect the flight and endurance
Can be used as a mirror to the end of the bracket, handheld takeoff and landing
Triangular reinforcement design around the perimeter for more stable support
Front and rear use snap-on independent mounting, stable hook front and rear arms, stronger force, more stable
The tripod is designed to lie on the outside, 90 degrees downward shooting will not shoot the tripod
Easy to install, quick release and quick install, pay attention to differentiate the tripod serial number
The total weight of this night light bracket and flashlight without battery is about 60g, the drone can fly normally after installation
Adopt the screw adjustment method, the flashlight angle can be easily adjusted, so that the flight has more probing angle
The bracket is 3D printed and molded, made of plastic, with a sponge attached to the contact part of the fuselage, effectively protecting the drone from scratches, and easy to install
Using XPE-R3 lamp beads, brightness 120LM, long service life, high brightness, compact size, easy to install
Supports motion control and can be used with DJI Goggles 2 and RC Motion . The attitude of the aircraft can change following hand movements, making the operation intuitive and easy to use.
4K/60fps 155-degree ultra-wide-angle video
Super stabilized video
The body is about 410 grams, lightweight and portable
Comes with propeller protection cover, safety upgrade
1080p/100fps image transmission quality delay as low as 30 milliseconds
Specially designed for DJI Mini 4 Pro. It fits the Mini 4 Pro very well. The split tripod design will not block the indicator light, fill light, bottom sensor and heat dissipation hole. It will not open obstacle avoidance and can be used with the STARTRC paddle. Install and use together.
Can effectively increase the distance between the drone and the ground by 20 mm. When the Mini 4 Pro takes off or lands on uneven ground, it can reduce the impact force, allowing the drone to land smoothly, and protect the Mini 4 Pros body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the Mini 4 Pro drone ability to adapt to the ground environment during takeoff and landing.
Adopting a split quick-release design, the battery can be quickly replaced without disassembly. After disassembly, it is easy to store and carry. It can be stored in the original bag, STARTRC special bag and most bags on the market.
Lightweight materials and lightweight design, the entire landing gear weighs only 11g. The lightweight design will not add extra burden to the Mini 4 Pros flight, and it will not shake or fall off during flight.
Size: front leg 16.5 x 60 x 46mm, rear leg 24.5 x 59 x 36mm
The illuminated tripod is specially designed for DJI Mini 4 Pro drone. It fits the curved surface of the Mini 4 Pro body very well and has a hollow carving design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes. It can help you better observe your surroundings when you are flying or taking off or landing in the dark night.
Yellow, green and blue mixed color lights, 3 flashing modes, fast flashing mode, slow flashing mode and constant light mode.
The luminous tripod can increase the distance between the bottom of the Mini 4 Pro and the ground by 20 mm. When the Mini 4 Pro is used at night or on overgrown or bumpy gravel roads, it can reduce the impact and make it easier for no one to use it. The drone lands smoothly, preventing ground debris or water stains from soiling or damaging the drone body, gimbal, sensors and propellers, providing safe landing protection.
Built-in battery, rechargeable and reusable, the charging time is about 30 minutes, and the use time after full charge is about 60 minutes.
Lightweight design. The light-emitting tripod weighs only 18.5 grams and can stably carry the fuselage. The lightweight design will not add extra burden to the Mini 4 Pro flight and will not shake or fall off during flight. It also adopts a foldable and quick-release design that will not damage the drone body, is easy to install, and improves portability.