Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Others
For DJI Neo CQT Lens Protective Cover Drone Gimbal Protector
- PC material, strong and durable, high toughness, beautiful and practical
- Accurately fit the curved surface of the drone, slot fixed gimbal
- Integrated protection for the gimbal sensor, anti-knock, anti-scratch and dustproof
- Does not affect the drone storage, protect the gimbal camera during transport
- Size: about 3.5 x 3.1 x 2.6cm
- Weight: about 3.3g
- Attention: only include the protective cover, not include other
£4.87 £6.03
Original DJI Avata 2 Intelligent Flight Battery 2150 mAh
- Provides approx. 23-min flight time. Get ready for immersive flying with a few more batteries to create your FPV footage more freely and confidently.
- Capacity: 2150 mAh
- Weight: about 145 grams
- Nominal voltage: 14.76 volts
- Charging limit voltage: 17 volts
- Battery type: Li-ion
- Energy: 31.7 watt-hours (measured at 0.5C rate)
- Charging environment temperature: 5- 40 degrees Celsius
£111.28 £134.65
Original DJI Transmission Gold-Mount Battery Adapter For Video Transmitter/Video Receiver
- With this accessory, Gold-mount batteries can be attached to the DJI Video Transmitter or DJI Video Receiver to provide power.
- Weight: 244g
- Battery-side dimensions: 12589.517.3 mm (LWH)
- Camera-side dimensions: 1258021.5 mm (LWH)
- Compatibility:
- DJI Video Transmitter
- DJI Video Receiver
£151.67 £188.07
Original DJI High-Bright Remote Monitor V-Mount Battery Adapter
- With this accessory, V-mount batteries can be attached to the DJI High-Bright Remote Monitor to provide power.
- Weight: 251g
- Dimensions: 1389037 mm (LWH)
- Compatibility: DJI High-Bright Remote Monitor
- Packing list:
- DJI High-Bright Remote Monitor V-Mount Battery Adapter 1
- Fixing Screw 1/4"-9 2
£100.25 £118.29
Original DJI Focus Pro LiDAR to DJI Transmission Cable Hub For RS 4 Pro/RS 3 Pro
- The cable hub allows DJI RS 4 Pro to power the DJI Focus Pro LiDAR and DJI Video Transmitter simultaneously, eliminating the need for an external V-mount battery.
- Meanwhile, utilizing the DJI Ronin 4D Hand Grips and High-Bright Remote Monitor, you can select LiDAR focus subjects, switch focus modes, enable LiDAR Waveform, and access more features.
- Weight: 139.3 grams
- Compatibility: DJI RS 4 Pro / DJI RS 3 Pro / DJI Transmission
- Packing list:
- Focus Pro LiDAR to DJI Transmission Cable Hub 1
- Dual USB-C Stabilizer Power Cable 1
£133.76 £160.51
Original DJI SDR Transmission Tablet Holder Kit
- This kit integrates the receiver with a tablet, presenting an enhanced handheld monitoring experience.
- The receiver can connect to a tablet via the USB-C port, delivering SDR video transmission at a bitrate of up to 20 Mbps. It is stable, reliable, and also capable of powering the tablet during the monitoring process.
- Due to limited charging power, when connected to tablets or certain smartphones, it can only slow down the rate at which the devices battery drains.
- Dimensions: 1555066 mm (LWH)
- Weight: 219 grams
- Compatibility: DJI SDR Transmission Receiver
- Packing list:
- RX to Phone Connection Cable (USB-C to USB-C, 22 cm) 1
£53.04 £64.71
Original DJI RX to Phone Connection Cable (USB-C to USB-C, 22 cm)
- This cable can connect the receiver to a smartphone or tablet. It features L-shaped connectors for easy and convenient installation.
- Length: 22 cm
- Specifications: USB-C to USB-C
- Compatibility: DJI SDR Transmission Receiver
- Packing list: RX to Phone Connection Cable x 1
£11.95 £13.86
Original DJI Zenmuse H30T Infrared Density Filter
- After installing the Infrared Density Filter on the infrared thermal camera, the temperature measurement range in Low Gain mode can be increased to 0 to 1600 degrees Celsius(32 to 2912 degrees Fahrenheit ), and in High Gain mode to -20 to 450 degrees Celsius (-4 to 842 degrees Fahrenheit), catering to high-temperature measurement needs.
- For installation, please refer to the Quick Start Guide. Repeated mounting and dismounting of the Infrared Density Filter may leave scratches on the front case of Zenmuse H30T, which is normal and does not affect the products functionality.
- Compatibility: Zenmuse H30T
- Weight: 10 grams
- Packing list:
- Infrared Density Filter 1
- Filter Case 1
- Quick Start Guide 1
£168.20 £210.24
For DJI Air 3S/3 Luminous Stickers Night Glow Film (Orange Yellow)
- Use of luminous PVC material, waterproof and anti-fouling, adhesive does not hurt the machine
- Easy to stick, no adhesive left
- Durable, strong light can continue to light up after irradiation
- Cool effect during the day and increase flight safety at night
- Material: PVC
- Attention: only stickers, not including others
£6.85 £8.29
For DJI Air 3S/3 Luminous Stickers Night Glow Film (Pink)
- Use of luminous PVC material, waterproof and anti-fouling, adhesive does not hurt the machine
- Easy to stick, no adhesive left
- Durable, strong light can continue to light up after irradiation
- Cool effect during the day and increase flight safety at night
- Material: PVC
- Attention: only stickers, not including others
£6.85 £8.29
For DJI Air 3S/3 Luminous Stickers Night Glow Film (Light Green)
- Use of luminous PVC material, waterproof and anti-fouling, adhesive does not hurt the machine
- Easy to stick, no adhesive left
- Durable, strong light can continue to light up after irradiation
- Cool effect during the day and increase flight safety at night
- Material: PVC
- Attention: only stickers, not including others
£6.85 £8.49
For DJI Avata Single Fuselage Sticker No Adhesive Personalised Stickers (A-07 Baby Whale)
- Precise cutting, fit the machine body
- PVC thin material, does not affect the heat dissipation
- Self-adhesive, waterproof, no colour fading, no trace of tearing off
- Backing pocket air guide groove, fit the fuselage, no blistering, no warping
- Material: PVC
- Attention: only stickers, not including others
£10.15 £11.77
NEED HELP?
Payment options
