The screw of the ball head is made of stainless steel, the hardness and corrosion resistance are greatly enhanced, and there will be no problem of product breakage
The length of the screw can also be adjusted. When encountering a shallow screw hole, tighten the movable sleeve clockwise, and then use a hexagonal wrench to reinforce the screw. The bottom of the cylinder is designed with an anti-loosening rubber pad, even if the ball head is only locked a little, it can be stable, so as to solve the problem of breakage caused by loosening of the ball head during use and the problem that the shallow screw hole cannot be locked.
Process: CNC machining, anodizing, fine sandblasting, comfortable hand feel
Three kinds of silicone circle for different bicycle pipes of 19-35mm diameter.
360 degree adjustable clip can record every wonderful moment.
The Bracket Can Hold AirTag.
Compatible with multi kinds of sports camera, such as for GoPro series, Action Series, Insta360 GO series, Insta360 ONE R series, insta360 Ace series, etc.
Apply for Pocket series, Insta360 One X series, Fimi Palm series with a 1/4 inch adapter.
Real machine mold opening, precise fit, protect the camera in all directions, do not block the switch button and radio hole position
Abundant expansion, with 3 cold shoes and 1/4 screw holes on the top and side, expansion microphone, fill light, selfie stick, tripod, etc. Convenient disassembly and assembly, no tools required
CNC integrated molding, stable structure, not easy to produce scratches
Main body Made of aviation aluminum alloy, and the handle is made of high-quality PC, which is sturdy and durable and has a load-bearing capacity of 3KG.
The handle is both a rotating handle and a 1/4 screw on the top of the handle. It can also be used as a desktop tripod.
The selfie stick is made of aluminum alloy, with a thickened tube design and strong load-bearing capacity; The entire tube body adopts anodizing technology, and the rubber anti-slip handle design, anti-slip and anti-sweat. It has both quality and appearance, and feels comfortable to hold.
The selfie stick is a 5-section telescopic pole. The height is 28cm after contraction and expands to 113cm. Each section can be locked individually.
Use the rotating handle with a selfie stick, adjust the camera to bullet time mode, and shake it horizontally at a constant speed to easily shoot cool bullet time movies.
When used with a handle and a selfie stick as a ground tripod, the selfie stick should not be stretched too long for stability.
360-degree rotating double ball head: 360-degree rotating double ball head design can meet your shooting needs from any angle. The powerful magic arm on the double ball head can realize simultaneous shooting of camera/action camera.
Load capacity: The load capacity can reach 5KG, and clamp inner hole head is equipped with rubber, which can increase friction and make the device more stable, allowing you to confidently capture any details during shooting.
Capture point-of-view perspective from motorbike or bike; Great way to take shots of yourself or of people following you
Easy to use: Multi-functional double ball adapter only needs to tighten the middle knob, and the ball heads of all connecting parts can be fixed at the same time. And includes an extra elastic knob for easy removal of photography accessories.
Durable and portable: The magic arm bracket is made of CNC-processed aluminum alloy, which feels good in the hand. Small and portable, durable.
The protective frame makes full allowance for the opening and closing of the screen, allowing the screen to be opened and closed without any obstruction
The bottom of the protective frame and the USB cover have reserved openings for the seamless installation of original quick release accessories, flash transfer partners, audio charging adapters and other accessories
Flip the screen with three finger positions, so that the screen opens easily open and comfortable
Horizontal shot: the quick release adapter can be fixed on the bottom of the camera
Vertical shooting: the quick release adapter can be fixed on the quick release connector of the protective frame
The quick release mounting port of the protective frame adopts non-magnetic direction design, when shooting vertically, you don't need to re-disassemble the quick release base, you can directly turn the camera 180 degrees to install it, and it is easy to realize the front shooting and self-timer
Cold shoe expansion interface, can be installed fill light, microphone, let you Vlog more easily
Foldable magnetic bayonet design, free to put away, unique texture, easy to operate
Dual cold shoe port, dual 1/4 threaded interface, support for horizontal and vertical shooting, expandable fill light, microphone, selfie stick, etc.
Swivel flip cover, screw fastening, faster use
Body interface is not covered, shooting operation is more convenient
Aviation aluminum, lightweight and portable
Soft foam all-round protection of the camera body
Compatible with the original flash memory companion, the original panoramic lens stick-on protective mirror, the original charging audio adapter, data cable, etc.
Suitable for Insta360 ONE RS 4K Boost Lens Edition, 360 Panoramic Edition, 4K Wide Angle Edition, One Inch Wide Angle Edition
Do flip cover structure design at the battery compartment, a push flip cover toggle, you can open the flip cover for battery replacement, convenient and fast
Silicone protective cover for the lens, so that the camera can be stored to avoid bumps and scratches
The rabbit cage makes full allowance for the opening and closing of the screen, which allows the screen to be opened and closed without any obstruction
Flip the screen with two fingers, so that the screen can be opened easily and comfortably
Horizontal shooting: the quick release parts are attached directly to the camera through the opening at the bottom of the rabbit cage
Vertical shot: the quick release accessory is attached to the side of the rabbit cage
The quick release mounting port of the protective frame is designed in a non-magnetic direction, so that when shooting vertically, you don't need to re-disassemble the base of the quick release, and you can directly turn the camera 180 degrees to install it, so that you can easily realize the front shooting and self-timer
Soft foam on the top and bottom of the inner side, the camera can be firmly fixed after installation
Suitable for DJI OSMO Pocket 3 pocket gimbal camera;
Made of high-quality aluminum alloy material and CNC process, the product is durable and textured;
Provide solid protection for the gimbal camera to prevent damage to the camera due to collision; good heat dissipation performance to prevent the camera from collapsing due to overheating;
The protective case has 2 cold shoe openings, which can be expanded to connect fill lights, microphones, etc.;
Universal adapter, easy to install and remove;
Wide compatibility. There is a 1/4-inch screw hole at the bottom, and an adapter can also be installed to facilitate the connection of photography heads, selfie sticks, handles, tripods, etc.