Delay time upgraded to: 3/15/30/60 seconds, default delay 15 seconds
Prompt sound upgraded: drip-drop prompt is slower, not noisy and harsh
After canceling the trigger, there will be a beep prompt, silent protection, and prompt after delay
The host has two No. 7 batteries, and the battery is not delivered
General alarm: When the door or window is opened, the alarm sound will be issued immediately
Door closing alarm: If the door has been opened for 15 seconds (15 seconds is the factory default value, 3 seconds/15 seconds/30 seconds/60 seconds according to your choice), the alarm will continue to sound until the door is closed
Doorbell mode: a "ding-dong" sound is emitted when the door is opened
Cost savings. Because it only needs to install one cable instead of two. In many cases, it needs to be installed in a place where it is difficult to deploy AC power. With the increase of equipment connected to Ethernet, if there is no need to provide local power for the equipment, it will greatly reduce the cost of deployment and simplify its manageability.
Easy to install and manage. Customers can mix original equipment and PoE equipment on the network automatically and safely, and can coexist with existing Ethernet cables.
Security. Because the PoE power supply equipment will only supply power to the equipment that needs to be powered. Only when the equipment that needs to be powered is connected, there will be voltage on the Ethernet cable, thus eliminating the risk of leakage on the line.
Easy to manage network equipment.
Applicable to: Wireless routers, network monitoring, access control systems, switches, etc.
Connector Type: 2.1mm x 5.5mm Jack, RJ45 Male, RJ45 Female
Cost savings. Because it only needs to install one cable instead of two. In many cases, it needs to be installed in a place where it is difficult to deploy AC power. With the increase of equipment connected to Ethernet, if there is no need to provide local power for the equipment, it will greatly reduce the cost of deployment and simplify its manageability.
Easy to install and manage. Customers can mix original equipment and PoE equipment on the network automatically and safely, and can coexist with existing Ethernet cables.
Security. Because the PoE power supply equipment will only supply power to the equipment that needs to be powered. Only when the equipment that needs to be powered is connected, there will be voltage on the Ethernet cable, thus eliminating the risk of leakage on the line.
Easy to manage network equipment.
Applicable to: Wireless routers, network monitoring, access control systems, switches, etc.
Connector Type: 2.1mm x 5.5mm Jack, RJ45 Male, RJ45 Female