B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)
Safe use recommendations:
This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type
B2=Lithium ion battery (3 strings of 3.7V=11.1V lithium battery)
B3=Lithium iron phosphate battery (4 strings of 3.2V=12.8V)
Safe use recommendations:
This controller is suitable for 3 kinds of batteries, lead-acid batteries (12V/24V battery automatic identification), lithium-ion batteries, lithium iron phosphate batteries, please do not use in other batteries
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
When installing for the first time, please set the battery type according to the battery type, and make sure the battery has enough voltage so that the controller can recognize the correct battery type
This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment
This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be
This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface
This controller is a 12V-24V general-purpose controller, when installing for the first time, please make sure the battery has enough voltage so that the controller can work normally
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, affecting the normal voltage judgment
This controller is suitable for all kinds of lead-acid batteries (including open, sealed, gel, etc.), lithium ternary batteries, lithium iron phosphate batteries, the use of which need to be set up can be
This controller can only use photovoltaic panels as a charging source, please do not use DC or other power sources as a charging source
The controller will be hot when running, please note that the controller will be installed on a flat, well-ventilated surface
Dual Ethernet port design, support communication and PoE power supply cascade
With flash-on and flash-off functions, the relay can be controlled by command to automatically close after being turned on for a period of time
Support DC7V-36V wide voltage power supply, support PoE Ethernet power supply
Support control of relays through MQTT protocol, and provide Alibaba Cloud MQTT application routines
Onboard optocoupler isolation to avoid interference from relay high-voltage circuits
Adopt special relay driver chip with built-in freewheeling diode protection, with stronger and more stable driving ability
The switch input has bidirectional optocoupler isolation, supports passive and active switch input, built-in de-jitter algorithm, and the relay supports switch input linkage mode or flip mode control
Onboard anti-reverse connection circuit to avoid reverse connection of positive and negative poles and burnout of the circuit
The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries
The controller defaults to 12V/24V auto-adaptation, when installing for the first time, please make sure to connect the battery first and ensure that the battery has enough voltage so that the controller can recognize it as the correct battery type
Install the controller as close to the battery as possible to avoid the voltage drop caused by long wires, which will affect the normal voltage judgment
This controller is only applicable to B1 lead-acid batteries, B2 lithium batteries, B3 lithium iron phosphate batteries