Sort by
Display per page
- Low-power SoC equipped with RISC-V 32-bit single-core processor, clocked at up to 160MHz
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
- 400KB SRAM and 384KB ROM, and 4MB onboard flash memory
- Castle-shaped module and on-board ceramic antenna, allowing direct soldering to the carrier board
- Support flexible clock and module power independent settings and other controls to achieve low power consumption in different scenarios
- Integrated USB serial port full-speed controller, 15GPIO pins, pin functions can be flexibly configured
- 3SPI, 1I2C, 2UART, 1I2S, 2ADC, etc.
- Product size: 23.5 x 18mm
- Made of comfortable leather, non-toxic and tasteless
- A variety of colors, you can choose according to your preferences
- All-inclusive design, full protection of the tracker
- Comes with a hanging loop, which can be safely fixed
- Easy to install, protect and anti-scratch, can fix the equipment
- Bluetooth pairing name: P2961
- Battery capacity: 300mAh
- Charging time: about 2h
- Bluetooth: V5.1
- Transmission distance: within 10m
- Talking time: about 6h
- Music playback time: about 10h (70% volume)
- Impedance: 32 ohms
- Adopt pogo pin connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
- Onboard lithium battery charging chip, with dynamic path management, more stable power supply
- Onboard boost converter chip provides stable 5V power output
- I2C bus communication, real-time monitoring of battery voltage, current, power, and remaining power
- Multiple battery protection circuits: overcharge/discharge protection, overcurrent protection, short circuit protection, safer and more stable
- Onboard MCU management, supports detecting power connection and starting Raspberry Pi
- Supports displaying battery power on the system to facilitate checking the remaining battery power.
- Onboard LED indicator for monitoring battery working status
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
- Drop-proof, drop-proof and dust-proof, comprehensive protection
- Magnetic design, can be adsorbed on the iron surface, easy to install
- Silicone material, soft and wear-resistant
- Material: silicone
- Technology: injection molding
- Size: about 4.5 x 3 x 0.8cm
- Weight: about 10.5g
- Note: only the protective case, the location tracker and other items in the picture are not included
- Material: TPU electroplating process
- Comprehensive Protection: Protect your headphones from dust, scratches and external impacts.
- Convenient charging: Keep the charging port, you can charge the earphones without taking off the protective cover, and use all functions easily.
- Personalized design, fashionable and beautiful.
- Equipped with a lanyard: allows you to carry the headphones safely and conveniently anytime and anywhere.
- Product does not include headphones.
- Durable: PU+TPU material, wear-resistant and durable. With good performance and high quality, it can be used for a long time.
- Practical card slot function: 1 card slot design can store your credit card or small banknotes that you need daily.
- Convenience: Precise openings allow access to all keys and ports without removing the case.
- Anti-fall: TPU all-covered design at four corners, anti-shock and anti-fall, no fear of bumps.
- Protection: Adequately protect the device from normal scratches, dirt, tears and wear and tear.
- Stand: The 360-degree rotating ring stand allows you to free your hands when making hands-free video calls, reading or watching movies.
- Note: The actual product is subject to the title model, and the picture model is for reference only.
- Durable: PU+TPU material, wear-resistant and durable. With good performance and high quality, it can be used for a long time.
- Practical card slot function: 1 card slot design can store your credit card or small banknotes that you need daily.
- Convenience: Precise openings allow access to all keys and ports without removing the case.
- Anti-fall: TPU all-covered design at four corners, anti-shock and anti-fall, no fear of bumps.
- Protection: Adequately protect the device from normal scratches, dirt, tears and wear and tear.
- Stand: The 360-degree rotating ring stand allows you to free your hands when making hands-free video calls, reading or watching movies.
- Note: The actual product is subject to the title model, and the picture model is for reference only.
- Guidance display real battery data
- Read the battery information automatically
- Test whether original or not
- Modify the battery data
- Note: This product needs to be used with an i2C programmer
- Automatically update data guide-free. battery health automatically updates to 100% with 0 cycles