Personal menu

WORLDWIDE SHIPPING

fast, flexible, secure options

ONLINE SUPPORT 24 / 7

anytime, anywhere help

MONEY BACK GUARANTEE

shop with confidence

WIDE SELECTION

every day low prices

Electronics

View as Grid List

Sort by

Display per page

For Sony Xperia 10 IV Original Charging Port Board

Charging port board replacement part.
This part is used to replace your damaged or unworkable one with a new one.
Each item has been checked and in good condition before shipping.
Completely fit and work.
The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation.

£5.64 £6.49

For Sony Xperia 1 III SO-51B XQ-BC62 XQ-BC72 Original Charging Port Connector

Replacement charging port connector.
Replace your broken or unusable item with a new one.
Each item has been checked and in good condition before shipping.
Completely fit and work.
Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

£2.65 £3.26

For Sony Xperia 1 J8110 J8170 J9110 J9150 Original Charging Port Connector

Replacement charging port connector.
Replace your broken or unusable item with a new one.
Each item has been checked and in good condition before shipping.
Completely fit and work.
Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

£2.65 £3.18

For Sony Xperia 1 II XQ-AT51 XQ-AT52 Original Charging Port Connector

Replacement charging port connector.
Replace your broken or unusable item with a new one.
Each item has been checked and in good condition before shipping.
Completely fit and work.
Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

£2.65 £3.05

For Sony Xperia 5 J8210 J8270 J9210 Original Charging Port Connector

Replacement charging port connector.
Replace your broken or unusable item with a new one.
Each item has been checked and in good condition before shipping.
Completely fit and work.
Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts.

£2.65 £3.16

Waveshare JetBot AI Kit Accessories, Add-ons for Jetson Nano to Build JetBot, US Plug

Overview
Smart robot is always the favorite project of electronic enthusiasts, however, a robot will be "not that smart" if it is not AI-based.
Welcome the JetBot, an actual smart robot powered by Jetson Nano. With the intelligent eye (front camera), facial recognition, object tracking, auto line following, and collision avoidance can be easily achieved. It also comes with ROS nodes code, which makes it easy to get started with the open source ROS (Robot Operating System), and to learn the system framework and concepts of ROS.
If you have got a Jetson Nano on your desk right now, combined with our open source codes and tutorials, these add-ons would be the ideal choice for you to learn AI robot designing and development.
Adopts 3x 18650 batteries (NOT included), high battery capacity, up to 12.6V voltage output, more powerful driving force.
Integrates S-8254AA + AO4407A lithium battery protection circuit, provides protections for over-charge, over-discharge, over-current, and short circuit.
Onboard APW7313 voltage regulator, provides stable 5V voltage for the Jetson Nano.
Onboard TB6612FNG dual H-bridge motor driver.

£76.34 £91.61

Waveshare MG996R Servo, Metal Gear, High Torque

Product: MG996R Servo
Torque: 9kg/cm(4.8V), 11kg/cm(6V)
Speed: 0.19s/60(4.8V), 0.18s/60(6V)
Rotate angle: 180
Operating voltage: 4.8 ~ 6V
Gear: metal
Dead band: 5us
Weight: 55g

£7.41 £8.52

Waveshare MG90S Micro Servo, Metal Gear

Product: MG90S Servo
Torque: 2.0kg/cm(4.8V), 2.8kg/cm(6V)
Speed: 0.11s/60(4.8V), 0.09s/60(6V)
Rotate angle: 180
Operating voltage: 4.8 ~ 6V
Gear: metal
Dead band: 5us
Weight: 12.2g

£6.84 £8.21

Waveshare WAVE ROVER Flexible Expandable 4WD Mobile Robot Chassis, Onboard ESP32 Module (EU Plug)

WAVE ROVER is a four-wheel-drive mobile robot chassis with an all-metal body. It has strong off-road traversing capabilities and shock absorption performance. All codes are open source and can be developed again.
Supports multiple hosts (Raspberry Pi, Jetson Nano, Jetson Orin Nano, etc.). The host can communicate with the ESP32 slave through the serial port.
Equipped with four N20 reduction motors and high-quality gearboxes, the mobile robot can travel at high speeds and has strong power.
Built-in 3S UPS power module, supports 3 18650 lithium batteries (series connection, not included), provides uninterrupted power supply for the robot, and supports charging and power output at the same time.
Built-in multi-functional robot driver board, based on ESP32, with onboard WIFI and Bluetooth, used to drive serial bus servos, output PWM signals, expand TF card slots, etc.
WAVE ROVER uses flexible rubber tires, which greatly reduces the impact of complex terrain and easily meets the needs of high-speed driving, shock absorption, and off-roading.
Comes with a mounting plate that can be used to install hosts (Raspberry Pi 4B, Jetson Nano, Jetson Orin Nano, etc.), LD19/STL-27L lidar, and gimbal cameras, providing more possibilities for secondary development.
Tire material: nylon wheels, rubber tires

£83.74 £103.84

Yahboom USB3.0 HUB Expansion Board ROS Robot Expansion Dock (6000301226)

Chip model: VL817
Transmission speed: 5Gbps (theoretical)
Input interface: USB-A
Data cable length: 30cm
Output interface: 4xUSB3.0
Interface compatibility: USB3.0 and backward compatible with USB2.0 and USB1.1
Supporting equipment: ROS robot/car, Raspberry Pi/Rising Sun RDK/Jetson series motherboards, PC computer, industrial computer
Compatible systems: Win7/8/10, Linux, MacOS, Ubuntu

£18.72 £21.72

Yahboom 8-bit Full-color RGB Light Ring Module Microbit Raspberry Pi Pico Development Board

VCC: power supply interface, can be connected to 3.3V, 5V
GND: ground
RGB: signal input
NC: empty interface, no connection required
Working voltage: 3.3V/5V
Module size: 28.7x30mm
RGB lamp model: TX1812C
Interface mode: crocodile clip interface, DuPont line interface, PH2.0 cable interface

£5.25 £6.36

Waveshare Smart Mobile Robot Chassis Kit, Chassis:With Shock-absorbing (Mecanum Wheels)

Rich open source demos, compatible with the general driver of Weixue Robot, can directly control a variety of peripheral modules
Modular structure, easy maintenance, this series design is easy to maintain and upgrade, eliminating the situation of replacing the whole unit due to damage or obsolescence
Low complexity, easy to use
Allows users to assemble and debug more easily, requiring less technical experience
Lightweight and high-strength, the mounting plate adopts a special structure to enhance strength and reduce weight
Double mounting plate structure, with mounting holes, suitable for most sizes, compatible with a variety of hardware, to meet different application scenarios and needs
Robotic Chassis-S Series Kit, Low Complexity Chassis with Flexible Assembly and Expansion Methods
Self-contained mounting plate, more flexible expansion

£29.34 £34.62