Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Diagnostic, Test & Measurement Tools
JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 30MHz (US Plug)
- Waveform length: 2048
- Point waveform sampling rate: 266MSa/s
- Waveform vertical resolution: 14 bits
- Amplitude resolution: 1mV
- Waveform output impedance: 50 ohms (typical)
- Protection: All signal output terminals can work within 60 under load short circuit conditions
- Sweep channel: CH1 or CH2
- Sweep type: linear sweep, logarithmic sweep
£88.90
£104.90
JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 15MHz (EU Plug)
- Waveform length: 2048
- Point waveform sampling rate: 266MSa/s
- Waveform vertical resolution: 14 bits
- Amplitude resolution: 1mV
- Waveform output impedance: 50 ohms (typical)
- Protection: All signal output terminals can work within 60 under load short circuit conditions
- Sweep channel: CH1 or CH2
- Sweep type: linear sweep, logarithmic sweep
£70.46
£84.56
JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 40MHz (US Plug)
- Waveform length: 2048
- Point waveform sampling rate: 266MSa/s
- Waveform vertical resolution: 14 bits
- Amplitude resolution: 1mV
- Waveform output impedance: 50 ohms (typical)
- Protection: All signal output terminals can work within 60 under load short circuit conditions
- Sweep channel: CH1 or CH2
- Sweep type: linear sweep, logarithmic sweep
£96.71
£114.11
JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 30MHz (AU Plug)
- Waveform length: 2048
- Point waveform sampling rate: 266MSa/s
- Waveform vertical resolution: 14 bits
- Amplitude resolution: 1mV
- Waveform output impedance: 50 ohms (typical)
- Protection: All signal output terminals can work within 60 under load short circuit conditions
- Sweep channel: CH1 or CH2
- Sweep type: linear sweep, logarithmic sweep
£88.52
£109.76
JUNTEK Programmable Dual-Channel DDS Function Arbitrary Waveform Signal Generator, Frequency: 15MHz (AU Plug)
- Waveform length: 2048
- Point waveform sampling rate: 266MSa/s
- Waveform vertical resolution: 14 bits
- Amplitude resolution: 1mV
- Waveform output impedance: 50 ohms (typical)
- Protection: All signal output terminals can work within 60 under load short circuit conditions
- Sweep channel: CH1 or CH2
- Sweep type: linear sweep, logarithmic sweep
£71.41
£84.26
BENERECH GT1050 Professional Digital Light Lux Meter
- Digital Lux Meter is a professional instrument for measuring luminosity and brightness. lt is used for light intensity measurement engineering, quality control, health prevention, and light intensity measurement in various environments, such as factories, schools, offices, traffic routes, homes, etc.
- Measuring illuminance and current value, maximum value, minimum value and difference.
- Measurement statistics illuminance integral, integral average and data recording functions.
- The alarm function of illuminance exceeding the default setting. By default, the high alarm is set to 20,000; the low alarm is 0; the set value is not related to the unit.
- luminance value data hold.
- lluminance temperature detection.
- Automaticrange; sensitive response; be able to measure low-light environment(<10Lx).
- Switchable illuminance units (Lx/Fc)and temperature units (C/F). Fc: footcandle; Lx:lux;conversion relationship:1Fc=10.764LX
£30.04
£34.55
DC 0-200V Voltage Current Battery Tester, Specification: PZEM-015 With 200A Shunt
- Mainly used to test various battery voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, discharge energy, power consumption and running time, and display the measurement data through the LCD screen.
- Voltage:
- Measuring range: 0-200V. (When the test voltage is less than 8V, please use the independent power supply method)
- Display format: less than 10V display such as: 9.99V
- Below 100V such as: 99.9V
- More than 100V display such as: 199V
- Minimum resolution: 0.01V
- Start test voltage: 0.05V
£12.64
£14.67
2pcs P6100 Oscilloscope Probe DC-100MHz BNC Connectors Scope Clip Probe
- Model: P6100
- Attenuation: X1; X10
- Input resistance: 1X: 1M+/-2%; 10X: 10M+/-2%
- Input capacitance: 1X: 85pF ~ 115pF; 10X: 18.5pF ~ 22.5pF
- Compensation range: 10pF-30pF
- Rise time: less than 3.5ns
- Operating voltage: 1X: less than 200VDC + AC peak 10X: less than 600VDC + AC peak Operating
- Temperature: -10~+50 degrees Celsius
£8.84
£11.04
HS-07 Handheld Treasure Hunt Metal Detector Positioning Rod (Green)
- Fully waterproof handheld metal detector with display, with high performance and high sensitivity
- With a screen display, visual detection signal battery power, the closer the metal is, the higher the signal indication, and the operation is simple
- Strong, shock-resistant, durable, integrated design
- IP68 waterproof grade, unique sealing design, waterproof and moisture-proof
- Can detect needles for childrens clothing, can detect about 2-5mm needles or staples
- Pulse detector, strong penetrating power, can be used in hard soil layers such as granite, limestone, shale, etc.
- Large disc probe design, good accuracy, high reliability and strong resistance
- Fast response, easy to detect, built-in copper induction coil
£33.11
£39.07
High-Precision Battery Voltage Internal Resistance Tester, Specifications: Host+Probe+Clip+Clamp
- Speed: 5 times/second
- Resistance: 1~200
- Voltage: 1mV 100V DC
- Test signal frequency: AC 1KH
- Test signal current: 20m, 50mA; 200m, 5mA; 20, 0.5 mA
- Resistance range: 6 ranges automatic and manual
- Voltage range: 3 ranges automatic and manual
- Display update: 5 times/second
£33.72
£42.15
High-Precision Battery Voltage Internal Resistance Tester, Specifications: Host+Clip
- Speed: 5 times/second
- Resistance: 1~200
- Voltage: 1mV 100V DC
- Test signal frequency: AC 1KH
- Test signal current: 20m, 50mA; 200m, 5mA; 20, 0.5 mA
- Resistance range: 6 ranges automatic and manual
- Voltage range: 3 ranges automatic and manual
- Display update: 5 times/second
£24.36
£30.21
Battery Internal Resistance Tester Lead-Acid Alkaline Lithium Battery Tester, Model: IR502
- Voltage: 0.00V~120V
- Internal resistance measurement: 0.000m~500
- Input voltage: DC 120V (regardless of polarity), AC input is not allowed
- Measurement current: 50mA~50uAAC
- Measurement speed: 3 times/second
- Measurement signal frequency: 1KHz
- Screen and size: IR500 55x57mmTN black and white screen; IR 502 55x57mmTN color screen
- Power supply: 3.7V 1200mAh lithium battery
£37.00
£45.88
NEED HELP?
Payment options
