This diagnostic tool serves as an ignition coil tester, injector tester, and stepper motor tester, catering to a wide range of automotive diagnostic needs.
1.8 inch Color display: Multiple functions can be fully displayed on one screen, and the color screen can display various parameters more humanely.
Adds a multimeter function that can measure resistance and voltage, which is helpful for judg-ing the quality of components.
The step motor drive current increases. Improve PWM driving to avoid damage to test components. DC/DC power supply to reduce heat generation.
The new solution uses a 32-bit ARM chip, which can control all function outputs and collect various parameters.Output can be shut down in case of overcurrent.
This terminal pin removal tool is made of high quality stainless steel material, which is very sturdy and can be used repeatedly.
The package includes 30pcs terminal pin removal tool. The sufficient quantity can meet your different needs.
This pin extractor tool is very easy to use, whether you are a professional or a novice. You can easily remove the terminals from the wire connector without damaging the wires.
The electrical wire connector pin release tool is widely used for car wiring, car audio repair, household equipment maintenance, circuit maintenance, etc.
Test light remedy the various deficiencies, VT100 has multi-function, such as automotive voltage tester, positive and negative polarity tester, car fuse tester, signal tester, design with exquisite workmanship, practical and durable, easy to use.
LED digital indicator, bidirectional voltage testing
Large size alligator clip, switch for different three working modes
Replaceable test light bulb, predictable frequency
Steel probe protective cover, two sharp stainless steel probes
Only for testing 5-30V, Please make sure that the voltage value of the product to be tested is within this range before testing.
When the LED indicator light is bright but test light bulb is not bright, it means bulb burnt out and should be replaced.
Can test whether the circuit is in a continuous state or an open circuit state. (The green light is on to indicate that the circuit is in a continuous state, and the green light is off to indicate that the circuit is in an open circuit state.)
Can quickly test the working state of the circuit diode component and determine the open circuit and continuity.
Grounding test: For whether there is a large current flowing through the component, the good grounding of the negative pole of the component can be tested. (The green light is on and a buzzer sounds, indicating good grounding, and the green light is on without a buzzer, indicating poor grounding.)
Current overload protection: When the current is overloaded or underloaded, the machine will automatically disconnect the circuit for protection and sound a buzzer alarm to reduce unnecessary losses.
Appearance: The gray tone matches the interior and exterior style of the car model, providing a consistent visual effect, maintaining the coordination and unity of the interior and exterior tones of the car, and enhancing the overall texture.
High-quality material: The main body is made of ABS, which has excellent impact resistance, heat resistance and chemical corrosion resistance. It has good stability and durability after long-term use and is not easy to age and deform.
Precision casting: The precision injection molding process is adopted to ensure that the handle surface is smooth and delicate, without burrs, the edge transition is natural, ergonomic design, comfortable grip, and smooth operation.
Precise installation holes: The installation holes and fixed buckles that match the door lock system of the applicable model are preset to simplify the installation process. No additional processing is required, and it can be directly replaced to ensure stability without looseness.
Wear-resistant design: The contact surface is treated with wear resistance to effectively resist friction loss in frequent daily use, keep the gloss as new, and extend the service life.
Appearance: The gray tone matches the interior and exterior style of the car model, providing a consistent visual effect, maintaining the coordination and unity of the interior and exterior tones of the car, and enhancing the overall texture.
High-quality material: The main body is made of ABS, which has excellent impact resistance, heat resistance and chemical corrosion resistance. It has good stability and durability after long-term use and is not easy to age and deform.
Precision casting: The precision injection molding process is adopted to ensure that the handle surface is smooth and delicate, without burrs, the edge transition is natural, ergonomic design, comfortable grip, and smooth operation.
Precise installation holes: The installation holes and fixed buckles that match the door lock system of the applicable model are preset to simplify the installation process. No additional processing is required, and it can be directly replaced to ensure stability without looseness.
Wear-resistant design: The contact surface is treated with wear resistance to effectively resist friction loss in frequent daily use, keep the gloss as new, and extend the service life.
Appearance: The black + silver color scheme matches the interior and exterior style of the vehicle, providing a consistent visual effect, maintaining the coordination and unity of the interior and exterior tones of the vehicle, and enhancing the overall texture.
High-quality material: The main body is made of ABS, which has excellent impact resistance, heat resistance and chemical corrosion resistance. It has good stability and durability after long-term use and is not easy to age and deform.
Precision casting: The precision injection molding process is adopted to ensure that the handle surface is smooth and delicate, without burrs, the edge transition is natural, ergonomic design, comfortable grip, and smooth operation.
Precise installation holes: The installation holes and fixed buckles that match the door lock system of the applicable vehicle model are preset to simplify the installation process. No additional processing is required, and it can be replaced to keep it stable and not loose.
Wear-resistant design: The contact surface is treated with wear-resistant treatment to effectively resist friction loss in frequent daily use, keep the gloss as new, and extend the service life.
Made from copper, these terminals are gold-plated to protect against corrosion. This coating helps maintain increased power flow and clear, making them a reliable choice for speaker wire connections.
Designed for 8 gauge power and ground wires, these crimp terminals are a versatile alternative to banana plugs. They offer a safer and more secure connection compared to bare wires, reducing the risk of electrical issues.
These crimp terminals and connectors feature a fork that provides superior electrical. They are ideal for ensuring a strong and reliable connection in your audio setup, enhancing the overall performance.
These crimp terminals are heat-tested to ensure they can handle high temperatures without degrading. This makes them a dependable choice for a variety of audio and electrical applications, providing long-lasting performance.
Ensure increased power flow and high-performance audio without distortion.
Vacuum adsorption plate: vacuum adsorption exhaust, easy to fix in multiple positions.
Built-in mechanical button: gently turn to adsorb, release pressure with one button, easy to pick up.
7KG high load: damping shaft hovers accurately. Mechanical lever linked alloy force arm, hovers at any fixed point, firmly holds the phone without falling.
Zinc alloy support rod: zinc alloy material, high mechanical strength and wear resistance, making the bracket stronger and more durable.
Foldable rotation: multi-axis design, 360-degree rotation to meet your needs.
Strong magnetic adsorption: N52 strong nepheline magnet, double-layer magnetic ring tightly adsorbs the phone, and the phone will not fall.