EcoOBD2 is a Plug&Drive Ready device to function the reducing fuel consumption for the economy and lower emission for the world.
EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.
It works based OBD2 protocols as remaping the Car computer ECU. After driving 200 km road total, EcoOBD2 adjusts itself to the car, according to the drivers habits and always keeps remaping the ECU to save fuel lower and immission.
What Does EcoOBD2 Make
According to your driving habits, EcoOBD2 makes new map in the car computer ECU for the vehicle lower fuel consumption.
As you driving much more KM/Mile, EcoOBD2 renews the map and adjusts itself to match your car for more fuel saving.
EcoOBD2 Chip Tuning Box
EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.
Works with all 1996 and newer cars & trucks that are OBD2 compliant (including CAN protocol)
Reads and clears generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turns off check engine light.
Supports multiple trouble code requests: generic codes, pending codes and the specific codes of manufacturer.
Functions: battery life evaluation / battery voltage monitoring / read real-time data / read the chassis number / I/M state indi-cation read freeze frame / six languages / clear fault code
Latest diagnostic and programming interface for the applications VAG ODIS-S (Service) and ODIS-E (Engineering),can replace the VAS 5054A and VAS 5055.
Available for Off-board Diagnostic Information Engineering from V6.2 onward and Off-board Diagnostic Information Service from V3.0.3 onward.
Support all VW Audi Skoda vehicles from 2000 onward including NEW & FUTURE MODLES under production.
Support WIFI & USB Connection:With wireless communication technology, can achieve wireless communication of the vehicle and diagnostic interface. The following countries can use both WIFI & USB Connection: Australia, Bosnia and Herzegovina, Brazil, Canada, Switzerland, Cyprus,Czech,Danmark,Estonia,Finland, Greece, Hongkong, Israel, India, Ireland,Italy, Lativia, Mexico, Netherland, New Zealand, Poland,Russia, Argentina, Korea, Singapore, Slovenia, Turkish, Ukraine, UAE, United States, United Kingdom. Also support USB module transmission, to ensure the reliability of diagnostic interface data transmission.if your country is not on the above authoriazted Country, you just can use USB Connection Module.
Flight Recorder: Records real-time parameters while driving and highlights specific errors with a button press. Built-in memory; no computer needed. Storage card not included.
Multi-Color Indicator: Indicates diagnostic status with different colors and sounds, visible from a distance. Alternating blue and green means communication with the vehicle control unit.
LED Connector: Helps locate the 16-pin diagnostic connector in dark or hard-to-reach places. LED works with adapter cables for non-16-pin sockets.
Voltage Check: Monitors vehicle battery voltage and adjusts to 12V or 24V levels. Alerts for high or low voltage with sounds and lights, and via the diagnostic software.
Chassis Number VIN: Automatically reads the chassis number for correct model and year selection, and common engine codes.
ISS: Scans all vehicle systems for fault codes, providing an overview of the vehicle condition. Allows further analysis of specific control systems.
ISI: Automatically identifies and selects the correct controllers installed in the vehicle for accurate diagnostics.
Report Function: Shows possible adjustments and settings without the vehicle nearby, with help texts for guidance.
Flight Recorder: Records real-time parameters while driving and highlights specific errors with a button press. Built-in memory; no computer needed. Storage card not included.
Multi-Color Indicator: Indicates diagnostic status with different colors and sounds, visible from a distance. Alternating blue and green means communication with the vehicle control unit.
LED Connector: Helps locate the 16-pin diagnostic connector in dark or hard-to-reach places. LED works with adapter cables for non-16-pin sockets.
Voltage Check: Monitors vehicle battery voltage and adjusts to 12V or 24V levels. Alerts for high or low voltage with sounds and lights, and via the diagnostic software.
Chassis Number VIN: Automatically reads the chassis number for correct model and year selection, and common engine codes.
ISS: Scans all vehicle systems for fault codes, providing an overview of the vehicle condition. Allows further analysis of specific control systems.
ISI: Automatically identifies and selects the correct controllers installed in the vehicle for accurate diagnostics.
Report Function: Shows possible adjustments and settings without the vehicle nearby, with help texts for guidance.
Wide range of use: suitable for most General Motors/Ford/Buick/Cadillac/Chevrolet/GMC/Lincoln/Mercury, etc. equipped with TPMS tire pressure monitoring system.
Easy to use: Simple to use, easy to operate, activate individual TPMS sensors with one click.
How to use: Make sure the vehicle is in re-learning mode and follow maintenance procedures. Hold the tool against the sidewall of the tire near the valve stem. Hold the tool against the sidewall of the tire while pressing the button.
The device is a small adapter that plugs into your vehicle's OBDII connector via Bluetooth and works with Android and iOS smartphones or Windows PCs. With this product you will be able to perform a complete computer diagnosis of your car and even correct minor faults without having to resort to a service station.
Displays the car's real-time performance, such as power, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position and intake air temperature.
If communication is interrupted, this item will automatically switch to sleep mode after half an hour.
The adapter uses a fast and reliable chip to ensure a stable wireless connection.
Support protocols: ISO 9141, KWP2000, SAE J1850, CAN, J1850 VPW, J1850 PWM
Small size, compact structure, plug and play, easy to use.
After installing the appropriate software in the host device, you may read the following parameters from the vehicle:
Look at Live Data, graphing and saving of live data.
Component Activation.
ECU Coding / Parameter Adjustments / Component Configuration (initialization of new components, particulate filter regeneration, Diesel Injector coding, TPMS etc).
Intelligent System Scan complete scan of all ECU / ECMs on vehicle platform, configurable by system.
Full Vehicle Information tree, allowing vehicle specific check of OBD functionality without being connected to a vehicle. Customer reporting system. Direct Linking to Technical Data
Service Light Reset and Service Interval Reset.
The Diagnostic Tool database offers a deep OBD2 generic and manufacturer specific coverage of European Cars.