Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Cables & Connectors
H508 OBD Car Charger Driving Recorder Power Cord 12/24V To 5V With Switch Low Pressure Protection Line, Specification: Micro Straight
- Material: ABS
- Input voltage: DC 12-36V
- Output: DC 5V/3000mA, DC 12V/1500mA
- Output interface: MINI/MICRO
- OBD connector: 16-pin (positive) /4-5-pin (negative)
- Scope of application: vehicle charging cable, driving recorder step-down cable, time-lapse video ACC power cable
- Power supply mode:
- ACC mode: when the car is on fire, the power cord will start to output power; when the car is turned off, the power cord will automatically stop power supply and turn off the output after 5 minutes
£7.09 £8.51
Car OBD2 Conversion Cable OBDII Diagnostic Adapter Cable for Tesla Model S
- Plug and play.
- Durable and reliable.
- Working temperature: -20-80 degrees Celsius
- Voltage: 9-16V
- Fits for Tesla Model S
£6.50 £8.06
8Pin to 16Pin Car OBD2 Conversion Cable OBDII Diagnostic Adapter Cable for Volvo
- Plug and play.
- Durable and reliable.
- Working temperature: -20-60 degrees Celsius
- Voltage: 12V
- Type: 8Pin to 6Pin
£7.95 £9.38
12Pin to 16Pin Car OBD2 Conversion Cable OBDII Diagnostic Adapter Cable for GM
- This is a data cable specially designed to connect your OBD2 scanner and your vehicle via a 12-pin connector dedicated to GM.
- Plug and play.
- Durable and reliable.
- Working temperature: -20-80 degrees Celsius
- Voltage: 9-16V
£6.24 £7.74
2 In 1 16PIN Car OBD Elbow Extension Cable Converted Cable
- Good electrical conductivity and long service life
- Wide range of use, can be used for various OBD2 compatible devices
- OBD2 male to double female design, can run 2 diagnostic devices in one vehicle
- Note: When two devices work at the same time, only one device can read the vehicle data
- Line length: 30cm
- Material: brass wire
- Voltage: 9-36v
- Operating temperature: -60 to 80 degrees Celsius
£7.24 £9.05
108 GPS Locator 12V/24V To 5V Low Voltage Protection Power Cable
- Material: ABS
- Output interface: Mini&Micro&Type-c
- Input voltage: 12-30V
- Output voltage/current: 5V/2A
- Low voltage protection: 11.6V
- Power: 10W(MAX)
- Overcurrent protection: 3A
- Working temperature: minus 20-80 degrees Celsius
£9.35 £11.31
OBD2 1 for 2 Extended Line Car OBD16 Core Full-Expansion Line
- Easy to install, plug and play
- Wear-resistant and durable, stable and smooth transmission
- Environmentally friendly flexible TPE wire
- Voltage: 12V
- Material: TPE
- Number of needles: 16 needles 16 cores
- Length: about 30 cm
- Weight: about 200g
£6.29 £7.43
2 PCS J1962f OBD2 16PIN 90 Degree Bend Female Head Connector, Gold Plated + Nickel Plated
- Gold-plated/nickel-plated male housing, wear-resistant and durable
- The gold-plated/nickel-plated pins are more durable, and the transmission is stable and smooth
- Durable and corrosion resistant
- Easy to install, plug and play
- Material: ABS
- Number of needles: 16 needles
£7.13 £8.27
6-color OBD ECU Scan Adapter Cable Bundle for Fiat
- Cable length: 22cm
- Note: There are only used as a connecte cable and does not contain any software or diagnostic cables
- There are 6 adaptor cables included which perform different functions.
- Green ABS / Power Sreeing adapter lead (Adapter 1 on MultiECUScan website)
- Designed to allow access to the ABS and Power Steering systems on supported vehicles. This adapter has a green connector on one end for easy identification.
- Using this adapter, Pin 7 on the diagnostic tool is connected to Pins 1,7,9 & 12 on the car.
- Red Airbag adapter lead ( Adapter 2 on MultiECUScan website)
- Designed to allow access to the Airbag system on supported vehicles.
£13.55 £15.85
Car 16Pin OBD2 Extension Line Male to Female Adapter Cable for Launch EasyDiag 3.0
- This cable is for connecting X431 iDiag with OBD2 port. It is only for extension use.
- TPU material, sturdy and durable, flexible and not easy to break, environmentally friendly and harmless, soft to the touch, port structure design.
- Easy to pull and plug.
- For X431 V/V+/PRO/PRO 3/Easydiag 3.0/2.0/Mdiag/Golo
- Pin number: 16Pin
£8.02 £9.47
Car Soic 8 Clip Xprog Anti-theft Data Reading Adapter
- Read and Write Anti-theft Data
- Convenient and Safe
- Stable without losing Data
- Anti-theft 95128/95256 Meter 35080/35160
- Can read and write anti-theft data, and it is safe and stable without losing data.
- 8Pin Adapter Anti-theft Data Reading Adapter Work with VVDI Prog/CG Pro 9S12/Orange5 For BMW FEM-BDC 95128/95256 etc..
£12.23 £14.79
NEED HELP?
Payment options
