Two colors: 6000K xenon white light and 3000K amber light, just turn on/off to switch the desired color. At startup, the default color is white light. After 3s, simply switch the switch to change the light from 6000K xenon white light to 3000K amber yellow light. In sunny and foggy/rainy/haze environments, you can freely change the light color between 6000K white and 3000K golden yellow, adapt to different weather conditions in time, and greatly improve driving safety.
High-brightness design: Using 30 high-brightness 2525-LED chips (24 on the side + 6 on the top), the luminous brightness is far more than typical halogen bulbs, the light is fuller without shadows, and it provides more in the dark and bad weather Field of view and distance visibility.
Easy to install: suitable for most vehicles, 1:1 design with the original car halogen bulb, plug and play.
Waterproof design: IP65 waterproof material, dust-proof, cold-proof, shock-proof, can cope with all kinds of bad weather and extend the service life. The well-designed LED lamp can meet different extreme weather conditions, such as foggy, rainy or cloudy weather. No need to worry about the bulb damage when it rains or snows heavily.
Applicable models: applicable to BMW X3 /F25 2011 -2017
Features: use C-BUS smart chip, highly compatible with the original car equipment, can well inhibit the interference to the original car computer, automatic patch packaging, built-in high-quality surface mount and through-hole components directly insert and play, replacement of original car parts, no programming required
The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
Connect the relay bar lights cable(red / black correspond to bar wire lights).
Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
Turn on / off switch button to test the bar lights.
Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
Connect the relay bar lights cable(red / black correspond to bar wire lights).
Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
Turn on / off switch button to test the bar lights.
Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.